First
SCPI Command:
CONFigure:AFRF:MEASurement<Instance>:AIN:FIRSt:MLEVel
- class FirstCls[source]
First commands group definition. 3 total commands, 1 Subgroups, 1 group commands
- get_mlevel() float [source]
# SCPI: CONFigure:AFRF:MEASurement<Instance>:AIN:FIRSt:MLEVel value: float = driver.configure.afRf.measurement.audioInput.first.get_mlevel()
Specifies the maximum expected level for the AF1 IN connector. This setting is only relevant, if auto ranging is disabled. Use this command, if you want to set different level units, e.g. dBm (Table ‘Units relevant for remote commands’) , or set the level for both connectors independently.
- return:
max_level: Range: 10E-6 V to 43 V, Unit: V
- set_mlevel(max_level: float) None [source]
# SCPI: CONFigure:AFRF:MEASurement<Instance>:AIN:FIRSt:MLEVel driver.configure.afRf.measurement.audioInput.first.set_mlevel(max_level = 1.0)
Specifies the maximum expected level for the AF1 IN connector. This setting is only relevant, if auto ranging is disabled. Use this command, if you want to set different level units, e.g. dBm (Table ‘Units relevant for remote commands’) , or set the level for both connectors independently.
- param max_level:
Range: 10E-6 V to 43 V, Unit: V
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.configure.afRf.measurement.audioInput.first.clone()
Subgroups