Frange

SCPI Command:

CONFigure:AFRF:MEASurement<Instance>:FREQuency:COUNter:FRANge:STOP
CONFigure:AFRF:MEASurement<Instance>:FREQuency:COUNter:FRANge:STARt
CONFigure:AFRF:MEASurement<Instance>:FREQuency:COUNter:FRANge:ENABle

class FrangeCls[source]

Frange commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_enable() → bool[source]

# SCPI: CONFigure:AFRF:MEASurement<Instance>:FREQuency:COUNter:FRANge:ENABle
value: bool = driver.configure.afRf.measurement.frequency.counter.frange.get_enable()

Selects the frequency range to be searched.

return:

to_limit: OFF | ON OFF Entire supported frequency range ON Frequency range defined by the commands method RsCma.Configure.AfRf.Measurement.Frequency.Counter.Frange.start and method RsCma.Configure.AfRf.Measurement.Frequency.Counter.Frange.stop

get_start() → float[source]

# SCPI: CONFigure:AFRF:MEASurement<Instance>:FREQuency:COUNter:FRANge:STARt
value: float = driver.configure.afRf.measurement.frequency.counter.frange.get_start()

Defines the minimum frequency for the search procedure.

return:

lower: Range: 0 Hz to 3 GHz, Unit: Hz

get_stop() → float[source]

# SCPI: CONFigure:AFRF:MEASurement<Instance>:FREQuency:COUNter:FRANge:STOP
value: float = driver.configure.afRf.measurement.frequency.counter.frange.get_stop()

Defines the maximum frequency for the search procedure.

return:

upper: Range: 0 Hz to 3 GHz, Unit: Hz

set_enable(to_limit: bool) → None[source]

# SCPI: CONFigure:AFRF:MEASurement<Instance>:FREQuency:COUNter:FRANge:ENABle
driver.configure.afRf.measurement.frequency.counter.frange.set_enable(to_limit = False)

Selects the frequency range to be searched.

param to_limit:

OFF | ON OFF Entire supported frequency range ON Frequency range defined by the commands method RsCma.Configure.AfRf.Measurement.Frequency.Counter.Frange.start and method RsCma.Configure.AfRf.Measurement.Frequency.Counter.Frange.stop

set_start(lower: float) → None[source]

# SCPI: CONFigure:AFRF:MEASurement<Instance>:FREQuency:COUNter:FRANge:STARt
driver.configure.afRf.measurement.frequency.counter.frange.set_start(lower = 1.0)

Defines the minimum frequency for the search procedure.

param lower:

Range: 0 Hz to 3 GHz, Unit: Hz

set_stop(upper: float) → None[source]

# SCPI: CONFigure:AFRF:MEASurement<Instance>:FREQuency:COUNter:FRANge:STOP
driver.configure.afRf.measurement.frequency.counter.frange.set_stop(upper = 1.0)

Defines the maximum frequency for the search procedure.

param upper:

Range: 0 Hz to 3 GHz, Unit: Hz