Peak
SCPI Command:
CONFigure:AFRF:MEASurement<Instance>:MEValuation:LIMit:DEModulation:FDEViation:PEAK
- class PeakCls[source]
Peak commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- class PeakStruct[source]
Response structure. Fields:
Enable: bool: OFF | ON Enables or disables the limit check
Lower: float: A query returns the lower limit. A setting applies the absolute value to the upper limit and the absolute value plus a negative sign to the lower limit. Range: -100 kHz to 0 Hz, Unit: Hz
Upper: float: A query returns the upper limit. A setting ignores this parameter. Range: 0 Hz to 100 kHz, Unit: Hz
- get() PeakStruct [source]
# SCPI: CONFigure:AFRF:MEASurement<Instance>:MEValuation:LIMit:DEModulation:FDEViation:PEAK value: PeakStruct = driver.configure.afRf.measurement.multiEval.limit.demodulation.fdeviation.peak.get()
Configures limits for the frequency deviation results ‘+Peak’ and ‘-Peak’, measured for FM. The upper and lower limits have the same absolute value but different signs.
- return:
structure: for return value, see the help for PeakStruct structure arguments.
- set(enable: bool, lower: float = None, upper: float = None) None [source]
# SCPI: CONFigure:AFRF:MEASurement<Instance>:MEValuation:LIMit:DEModulation:FDEViation:PEAK driver.configure.afRf.measurement.multiEval.limit.demodulation.fdeviation.peak.set(enable = False, lower = 1.0, upper = 1.0)
Configures limits for the frequency deviation results ‘+Peak’ and ‘-Peak’, measured for FM. The upper and lower limits have the same absolute value but different signs.
- param enable:
OFF | ON Enables or disables the limit check
- param lower:
A query returns the lower limit. A setting applies the absolute value to the upper limit and the absolute value plus a negative sign to the lower limit. Range: -100 kHz to 0 Hz, Unit: Hz
- param upper:
A query returns the upper limit. A setting ignores this parameter. Range: 0 Hz to 100 kHz, Unit: Hz