PeakSearch

SCPI Command:

CONFigure:GPRF:MEASurement<Instance>:FFTSanalyzer:PSEarch:NOAMarkers
CONFigure:GPRF:MEASurement<Instance>:FFTSanalyzer:PSEarch

class PeakSearchCls

PeakSearch commands group definition. 2 total commands, 0 Subgroups, 2 group commands

class ValueStruct

Structure for setting input parameters. Fields:

• Full_Span_Enable_0: bool: OFF | ON Configures marker 0 OFF Search from PeakRangeFrom0 to PeakRangeTo0 ON Search the full frequency span

• Peak_Range_From_0: float: Start of peak search range for FullSpanEnable0 = OFF Range: - span / 2 to span / 2, Unit: Hz

• Peak_Range_To_0: float: End of peak search range for FullSpanEnable0 = OFF Range: - span / 2 to span / 2, Unit: Hz

• Full_Span_Enable_1: bool: Configures marker 1

• Peak_Range_From_1: float: No parameter help available

• Peak_Range_To_1: float: No parameter help available

• Full_Span_Enable_2: bool: Configures marker 2

• Peak_Range_From_2: float: No parameter help available

• Peak_Range_To_2: float: No parameter help available

• Full_Span_Enable_3: bool: Configures marker 3

• Peak_Range_From_3: float: No parameter help available

• Peak_Range_To_3: float: No parameter help available

• Full_Span_Enable_4: bool: Configures marker 4

• Peak_Range_From_4: float: No parameter help available

• Peak_Range_To_4: float: No parameter help available

get_noa_markers() → int

# SCPI: CONFigure:GPRF:MEASurement<Instance>:FFTSanalyzer:PSEarch:NOAMarkers
value: int = driver.configure.gprfMeasurement.fftSpecAn.peakSearch.get_noa_markers()

Specifies the number of active peak search markers.

return:

no_active_markers: Range: 0 to 5

get_value() → ValueStruct

# SCPI: CONFigure:GPRF:MEASurement<Instance>:FFTSanalyzer:PSEarch
value: ValueStruct = driver.configure.gprfMeasurement.fftSpecAn.peakSearch.get_value()

Defines the peak search ranges for the five markers. In this command, the markers are labeled 0 to 4. At the graphical user interface, they are labeled 1 to 5. The allowed ranges, reset values and default units are identical for all markers. The ranges depend on the configured span, see method RsCma.Configure.GprfMeasurement.FftSpecAn.fspan.

return:

structure: for return value, see the help for ValueStruct structure arguments.

set_noa_markers(no_active_markers: int) → None

# SCPI: CONFigure:GPRF:MEASurement<Instance>:FFTSanalyzer:PSEarch:NOAMarkers
driver.configure.gprfMeasurement.fftSpecAn.peakSearch.set_noa_markers(no_active_markers = 1)

Specifies the number of active peak search markers.

param no_active_markers:

Range: 0 to 5

set_value(value: ValueStruct) → None

# SCPI: CONFigure:GPRF:MEASurement<Instance>:FFTSanalyzer:PSEarch
structure = driver.configure.gprfMeasurement.fftSpecAn.peakSearch.ValueStruct()
structure.Full_Span_Enable_0: bool = False
structure.Peak_Range_From_0: float = 1.0
structure.Peak_Range_To_0: float = 1.0
structure.Full_Span_Enable_1: bool = False
structure.Peak_Range_From_1: float = 1.0
structure.Peak_Range_To_1: float = 1.0
structure.Full_Span_Enable_2: bool = False
structure.Peak_Range_From_2: float = 1.0
structure.Peak_Range_To_2: float = 1.0
structure.Full_Span_Enable_3: bool = False
structure.Peak_Range_From_3: float = 1.0
structure.Peak_Range_To_3: float = 1.0
structure.Full_Span_Enable_4: bool = False
structure.Peak_Range_From_4: float = 1.0
structure.Peak_Range_To_4: float = 1.0
driver.configure.gprfMeasurement.fftSpecAn.peakSearch.set_value(value = structure)

Defines the peak search ranges for the five markers. In this command, the markers are labeled 0 to 4. At the graphical user interface, they are labeled 1 to 5. The allowed ranges, reset values and default units are identical for all markers. The ranges depend on the configured span, see method RsCma.Configure.GprfMeasurement.FftSpecAn.fspan.

param value:

see the help for ValueStruct structure arguments.