Bandpass
SCPI Command:
CONFigure:GPRF:MEASurement<Instance>:IQRecorder:FILTer:BANDpass:BWIDth
- class BandpassCls[source]
Bandpass commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- get_bandwidth() float [source]
# SCPI: CONFigure:GPRF:MEASurement<Instance>:IQRecorder:FILTer:BANDpass:BWIDth value: float = driver.configure.gprfMeasurement.iqRecorder.filterPy.bandpass.get_bandwidth()
Selects the bandwidth for the bandpass filter.
- return:
bandpass_bw: You can enter values between 1 kHz and 40 MHz. The setting is rounded to the closest of the following values: 1 kHz / 10 kHz / 100 kHz / 1 MHz / 10 MHz / 40 MHz Unit: Hz
- set_bandwidth(bandpass_bw: float) None [source]
# SCPI: CONFigure:GPRF:MEASurement<Instance>:IQRecorder:FILTer:BANDpass:BWIDth driver.configure.gprfMeasurement.iqRecorder.filterPy.bandpass.set_bandwidth(bandpass_bw = 1.0)
Selects the bandwidth for the bandpass filter.
- param bandpass_bw:
You can enter values between 1 kHz and 40 MHz. The setting is rounded to the closest of the following values: 1 kHz / 10 kHz / 100 kHz / 1 MHz / 10 MHz / 40 MHz Unit: Hz