Frequency
SCPI Command:
SOURce:AFRF:GENerator<Instance>:DIALing:SCAL:FREQuency:RESet
SOURce:AFRF:GENerator<Instance>:DIALing:SCAL:FREQuency
- class FrequencyCls[source]
Frequency commands group definition. 2 total commands, 0 Subgroups, 2 group commands
- get_value() List[float] [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:DIALing:SCAL:FREQuency value: List[float] = driver.source.afRf.generator.dialing.scal.frequency.get_value()
Configures the user-defined tone table for SELCAL. To enable the table, set as follows: SOURce:AFRF:GEN:DIALing:SCAL:STANdard UDEFined See alsomethod RsCma.Source.AfRf. Generator.Dialing.Scal.standard
- return:
frequency: Comma-separated list of up to 16 frequencies You can specify fewer than 16 values to configure only the beginning of the tone table. Range: see table , Unit: Hz
- reset() None [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:DIALing:SCAL:FREQuency:RESet driver.source.afRf.generator.dialing.scal.frequency.reset()
Triggers a reset of user-defined frequency values to the default frequency values of the SELCAL standard.
- reset_with_opc(opc_timeout_ms: int = -1) None [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:DIALing:SCAL:FREQuency:RESet driver.source.afRf.generator.dialing.scal.frequency.reset_with_opc()
Triggers a reset of user-defined frequency values to the default frequency values of the SELCAL standard.
Same as reset, but waits for the operation to complete before continuing further. Use the RsCma.utilities.opc_timeout_set() to set the timeout value.
- param opc_timeout_ms:
Maximum time to wait in milliseconds, valid only for this call.
- set_value(frequency: List[float]) None [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:DIALing:SCAL:FREQuency driver.source.afRf.generator.dialing.scal.frequency.set_value(frequency = [1.1, 2.2, 3.3])
Configures the user-defined tone table for SELCAL. To enable the table, set as follows: SOURce:AFRF:GEN:DIALing:SCAL:STANdard UDEFined See alsomethod RsCma.Source.AfRf. Generator.Dialing.Scal.standard
- param frequency:
Comma-separated list of up to 16 frequencies You can specify fewer than 16 values to configure only the beginning of the tone table. Range: see table , Unit: Hz