Dialing

SCPI Command:

SOURce:AFRF:GENerator<Instance>:IGENerator<nr>:DIALing:STARt
SOURce:AFRF:GENerator<Instance>:IGENerator<nr>:DIALing
class DialingCls[source]

Dialing commands group definition. 3 total commands, 1 Subgroups, 2 group commands

get(internalGen=InternalGen.Default) → bool[source]
# SCPI: SOURce:AFRF:GENerator<Instance>:IGENerator<nr>:DIALing
value: bool = driver.source.afRf.generator.internalGenerator.dialing.get(internalGen = repcap.InternalGen.Default)

Starts or stops dialing a digit sequence. This command is relevant for dialing modes like SELCAL, DTMF, SelCall or free dialing. For dialing measurements, ensure a delay between starting the measurement and dialing the sequence via this command. Otherwise, the measurement misses the first tones and fails.

INTRO_CMD_HELP: Required delays depending on the input path:

  • AF and SPDIF paths: 400 ms

  • RF path: FM/PM - 850 ms AM/USB/LSB - 1.0 ms to 1.2 ms

param internalGen:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘InternalGenerator’)

return:

dialing_state: OFF | ON

set(dialing_state: bool, internalGen=InternalGen.Default) → None[source]
# SCPI: SOURce:AFRF:GENerator<Instance>:IGENerator<nr>:DIALing
driver.source.afRf.generator.internalGenerator.dialing.set(dialing_state = False, internalGen = repcap.InternalGen.Default)

Starts or stops dialing a digit sequence. This command is relevant for dialing modes like SELCAL, DTMF, SelCall or free dialing. For dialing measurements, ensure a delay between starting the measurement and dialing the sequence via this command. Otherwise, the measurement misses the first tones and fails.

INTRO_CMD_HELP: Required delays depending on the input path:

  • AF and SPDIF paths: 400 ms

  • RF path: FM/PM - 850 ms AM/USB/LSB - 1.0 ms to 1.2 ms

param dialing_state:

OFF | ON

param internalGen:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘InternalGenerator’)

start(internalGen=InternalGen.Default) → None[source]
# SCPI: SOURce:AFRF:GENerator<Instance>:IGENerator<nr>:DIALing:STARt
driver.source.afRf.generator.internalGenerator.dialing.start(internalGen = repcap.InternalGen.Default)

No command help available

param internalGen:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘InternalGenerator’)

start_with_opc(internalGen=InternalGen.Default, opc_timeout_ms: int = -1) → None[source]

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.afRf.generator.internalGenerator.dialing.clone()

Subgroups