Zigbee
SCPI Command:
SOURce:AFRF:GENerator<Instance>:ZIGBee:SNUMber
SOURce:AFRF:GENerator<Instance>:ZIGBee:DPAN
SOURce:AFRF:GENerator<Instance>:ZIGBee:DADDress
SOURce:AFRF:GENerator<Instance>:ZIGBee:SPAN
SOURce:AFRF:GENerator<Instance>:ZIGBee:SADDress
SOURce:AFRF:GENerator<Instance>:ZIGBee:PAYLoad
SOURce:AFRF:GENerator<Instance>:ZIGBee:MODE
SOURce:AFRF:GENerator<Instance>:ZIGBee:SDEViation
SOURce:AFRF:GENerator<Instance>:ZIGBee:SRATe
- class ZigbeeCls[source]
Zigbee commands group definition. 9 total commands, 0 Subgroups, 9 group commands
- get_daddress() str [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:DADDress value: str = driver.source.afRf.generator.zigbee.get_daddress()
Configures the destination address, i.e. the DUT’s address, to be signaled to the DUT, for ZigBee.
- return:
daddr: decimal Range: 0 to 65.535E+3
- get_dpan() str [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:DPAN value: str = driver.source.afRf.generator.zigbee.get_dpan()
Configures the destination ID of the private area network (PAN) signaled to the DUT, for ZIGBee.
- return:
dpan: Range: 0 to 65.535E+3
- get_mode() ZigBeeMode [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:MODE value: enums.ZigBeeMode = driver.source.afRf.generator.zigbee.get_mode()
Queries the modulation type used for ZIGBee.
- return:
mode: OQPSk
- get_payload() str [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:PAYLoad value: str = driver.source.afRf.generator.zigbee.get_payload()
Configures the payload data to be signaled to the DUT, for ZIGBee.
- return:
payload: No help available
- get_saddress() str [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:SADDress value: str = driver.source.afRf.generator.zigbee.get_saddress()
Configures the source address, i.e. the address of the CMA, signaled to the DUT, for ZIGBee.
- return:
saddress: Range: 0 to 65.535E+3
- get_snumber() str [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:SNUMber value: str = driver.source.afRf.generator.zigbee.get_snumber()
Configures the sequence number, for ZIGBee.
- return:
snum: Range: 0 to 255
- get_span() str [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:SPAN value: str = driver.source.afRf.generator.zigbee.get_span()
Sets the source ID of the private area network (PAN) signaled to the DUT, for ZIGBee.
- return:
span: Range: 0 to 65.535E+3
- get_standard_dev() List[float] [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:SDEViation value: List[float] = driver.source.afRf.generator.zigbee.get_standard_dev()
Queries the frequency deviations used for OQPSK modulation, for ZIGBee.
- return:
sdeviation: Range: -180 deg to 180 deg, Unit: deg
- get_symbol_rate() float [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:SRATe value: float = driver.source.afRf.generator.zigbee.get_symbol_rate()
Queries the symbol rate resulting from the configured transmission mode, for ZIGBee.
- return:
srate: Range: 0 symbol/s to 1E+6 symbol/s, Unit: bit/s
- set_daddress(daddr: str) None [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:DADDress driver.source.afRf.generator.zigbee.set_daddress(daddr = r1)
Configures the destination address, i.e. the DUT’s address, to be signaled to the DUT, for ZigBee.
- param daddr:
decimal Range: 0 to 65.535E+3
- set_dpan(dpan: str) None [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:DPAN driver.source.afRf.generator.zigbee.set_dpan(dpan = r1)
Configures the destination ID of the private area network (PAN) signaled to the DUT, for ZIGBee.
- param dpan:
Range: 0 to 65.535E+3
- set_payload(payload: str) None [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:PAYLoad driver.source.afRf.generator.zigbee.set_payload(payload = '1')
Configures the payload data to be signaled to the DUT, for ZIGBee.
- param payload:
No help available
- set_saddress(saddress: str) None [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:SADDress driver.source.afRf.generator.zigbee.set_saddress(saddress = r1)
Configures the source address, i.e. the address of the CMA, signaled to the DUT, for ZIGBee.
- param saddress:
Range: 0 to 65.535E+3
- set_snumber(snum: str) None [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:SNUMber driver.source.afRf.generator.zigbee.set_snumber(snum = r1)
Configures the sequence number, for ZIGBee.
- param snum:
Range: 0 to 255
- set_span(span: str) None [source]
# SCPI: SOURce:AFRF:GENerator<Instance>:ZIGBee:SPAN driver.source.afRf.generator.zigbee.set_span(span = r1)
Sets the source ID of the private area network (PAN) signaled to the DUT, for ZIGBee.
- param span:
Range: 0 to 65.535E+3