AfSettings
SCPI Command:
SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:CONNector
SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:ENABle
SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:SDM
SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:DDM
SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:POFFset
- class AfSettingsCls[source]
AfSettings commands group definition. 12 total commands, 4 Subgroups, 5 group commands
- get_connector() AudioConnector [source]
# SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:CONNector value: enums.AudioConnector = driver.source.avionics.generator.ils.gslope.afSettings.get_connector()
Selects the output connector for the generated AF signal (AF1 OUT or AF2 OUT) . If you want to route both the localizer signal and the glide slope signal to an AF output, you must configure different connectors for the two signals.
- return:
connector: AF1O | AF2O
- get_ddm() float [source]
# SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:DDM value: float = driver.source.avionics.generator.ils.gslope.afSettings.get_ddm()
Sets the difference in modulation depth between the two lobes. The maximum allowed absolute value is limited by the configured SDM value.
- return:
ddm: Range: -100 % to 100 %, Unit: %
- get_enable() bool [source]
# SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:ENABle value: bool = driver.source.avionics.generator.ils.gslope.afSettings.get_enable()
Enables or disables the modulation of the RF carrier with the audio tones for the two lobes.
- return:
enable: OFF | ON
- get_poffset() float [source]
# SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:POFFset value: float = driver.source.avionics.generator.ils.gslope.afSettings.get_poffset()
Sets the phase offset between the audio signals of the two lobes.
- return:
poffset: Range: -60 deg to 120 deg, Unit: deg
- get_sdm() float [source]
# SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:SDM value: float = driver.source.avionics.generator.ils.gslope.afSettings.get_sdm()
Sets the sum of depth of modulations (SDM) .
- return:
mod_depth: Range: 0 % to 100 %, Unit: %
- set_connector(connector: AudioConnector) None [source]
# SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:CONNector driver.source.avionics.generator.ils.gslope.afSettings.set_connector(connector = enums.AudioConnector.AF1O)
Selects the output connector for the generated AF signal (AF1 OUT or AF2 OUT) . If you want to route both the localizer signal and the glide slope signal to an AF output, you must configure different connectors for the two signals.
- param connector:
AF1O | AF2O
- set_ddm(ddm: float) None [source]
# SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:DDM driver.source.avionics.generator.ils.gslope.afSettings.set_ddm(ddm = 1.0)
Sets the difference in modulation depth between the two lobes. The maximum allowed absolute value is limited by the configured SDM value.
- param ddm:
Range: -100 % to 100 %, Unit: %
- set_enable(enable: bool) None [source]
# SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:ENABle driver.source.avionics.generator.ils.gslope.afSettings.set_enable(enable = False)
Enables or disables the modulation of the RF carrier with the audio tones for the two lobes.
- param enable:
OFF | ON
- set_poffset(poffset: float) None [source]
# SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:POFFset driver.source.avionics.generator.ils.gslope.afSettings.set_poffset(poffset = 1.0)
Sets the phase offset between the audio signals of the two lobes.
- param poffset:
Range: -60 deg to 120 deg, Unit: deg
- set_sdm(mod_depth: float) None [source]
# SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:AFSettings:SDM driver.source.avionics.generator.ils.gslope.afSettings.set_sdm(mod_depth = 1.0)
Sets the sum of depth of modulations (SDM) .
- param mod_depth:
Range: 0 % to 100 %, Unit: %
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.source.avionics.generator.ils.gslope.afSettings.clone()
Subgroups