RfSettings

SCPI Command:

SOURce:AVIonics:GENerator<Instance>:VOR:RFSettings:LEVel
SOURce:AVIonics:GENerator<Instance>:VOR:RFSettings:FREQuency

class RfSettingsCls

RfSettings commands group definition. 3 total commands, 1 Subgroups, 2 group commands

get_frequency() → float

# SCPI: SOURce:AVIonics:GENerator<Instance>:VOR:RFSettings:FREQuency
value: float = driver.source.avionics.generator.vor.rfSettings.get_frequency()

Sets the center frequency of the unmodulated RF carrier.

return:

freq: Range: 100 kHz to 3 GHz, Unit: Hz

get_level() → float

# SCPI: SOURce:AVIonics:GENerator<Instance>:VOR:RFSettings:LEVel
value: float = driver.source.avionics.generator.vor.rfSettings.get_level()

Sets the RMS level of the unmodulated RF carrier. The allowed range depends on several other settings, for example on the selected connector, the frequency and the external attenuation. For supported output level ranges, refer to the data sheet.

return:

level: Unit: dBm

set_frequency(freq: float) → None

# SCPI: SOURce:AVIonics:GENerator<Instance>:VOR:RFSettings:FREQuency
driver.source.avionics.generator.vor.rfSettings.set_frequency(freq = 1.0)

Sets the center frequency of the unmodulated RF carrier.

param freq:

Range: 100 kHz to 3 GHz, Unit: Hz

set_level(level: float) → None

# SCPI: SOURce:AVIonics:GENerator<Instance>:VOR:RFSettings:LEVel
driver.source.avionics.generator.vor.rfSettings.set_level(level = 1.0)

Sets the RMS level of the unmodulated RF carrier. The allowed range depends on several other settings, for example on the selected connector, the frequency and the external attenuation. For supported output level ranges, refer to the data sheet.

param level:

Unit: dBm

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.avionics.generator.vor.rfSettings.clone()

Subgroups

• RfOut