from ........Internal.Core import Core
from ........Internal.CommandsGroup import CommandsGroup
from ........Internal import Conversions
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class RfSettingsCls:
"""RfSettings commands group definition. 4 total commands, 2 Subgroups, 2 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("rfSettings", core, parent)
@property
def rfOut(self):
"""rfOut commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_rfOut'):
from .RfOut import RfOutCls
self._rfOut = RfOutCls(self._core, self._cmd_group)
return self._rfOut
@property
def channel(self):
"""channel commands group. 0 Sub-classes, 1 commands."""
if not hasattr(self, '_channel'):
from .Channel import ChannelCls
self._channel = ChannelCls(self._core, self._cmd_group)
return self._channel
[docs] def get_frequency(self) -> float:
"""SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:RFSettings:FREQuency \n
Snippet: value: float = driver.source.avionics.generator.ils.gslope.rfSettings.get_frequency() \n
Specifies the center frequency of the unmodulated RF carrier for the glide slope signal. \n
:return: freq: Range: 100 kHz to 3 GHz, Unit: Hz
"""
response = self._core.io.query_str('SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:RFSettings:FREQuency?')
return Conversions.str_to_float(response)
[docs] def set_frequency(self, freq: float) -> None:
"""SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:RFSettings:FREQuency \n
Snippet: driver.source.avionics.generator.ils.gslope.rfSettings.set_frequency(freq = 1.0) \n
Specifies the center frequency of the unmodulated RF carrier for the glide slope signal. \n
:param freq: Range: 100 kHz to 3 GHz, Unit: Hz
"""
param = Conversions.decimal_value_to_str(freq)
self._core.io.write(f'SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:RFSettings:FREQuency {param}')
[docs] def get_level(self) -> float:
"""SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:RFSettings:LEVel \n
Snippet: value: float = driver.source.avionics.generator.ils.gslope.rfSettings.get_level() \n
Specifies the RMS level of the unmodulated RF carrier. The allowed range depends on several other settings, for example
on the selected connector, the frequency and the external attenuation. For supported output level ranges, refer to the
data sheet. \n
:return: level: Unit: dBm
"""
response = self._core.io.query_str('SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:RFSettings:LEVel?')
return Conversions.str_to_float(response)
[docs] def set_level(self, level: float) -> None:
"""SCPI: SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:RFSettings:LEVel \n
Snippet: driver.source.avionics.generator.ils.gslope.rfSettings.set_level(level = 1.0) \n
Specifies the RMS level of the unmodulated RF carrier. The allowed range depends on several other settings, for example
on the selected connector, the frequency and the external attenuation. For supported output level ranges, refer to the
data sheet. \n
:param level: Unit: dBm
"""
param = Conversions.decimal_value_to_str(level)
self._core.io.write(f'SOURce:AVIonics:GENerator<Instance>:ILS:GSLope:RFSettings:LEVel {param}')
def clone(self) -> 'RfSettingsCls':
"""Clones the group by creating new object from it and its whole existing subgroups
Also copies all the existing default Repeated Capabilities setting,
which you can change independently without affecting the original group"""
new_group = RfSettingsCls(self._core, self._cmd_group.parent)
self._cmd_group.synchronize_repcaps(new_group)
return new_group